Performance of Gas Cavitation Jet Pipeline Pig:
It is composed of specially made spring steel, rubber sheets and a steel shaft main body. The process is complex but the operation is simple. It can carry electronic positioning.
This technology utilizes the cavitation effect and cavitation principle in fluid mechanics to thoroughly remove the hard scale on the inner wall of the pipeline. When the liquid is pushed forward from the rear of the cavitation pipe scale removal device, a pressure difference is generated in front of and behind the pipe scale removal device. The water flow passes through the gap between the spring blades and the rubber sheet, causing the spring blades to vibrate at high frequency and vibrate violently. The scale removal device is surrounded by the rapidly rotating vortex generated thereby. A continuously moving low-pressure area was formed - the water in this area was always in a vaporized state, and the resulting fine bubbles were rapidly compressed until they burst, instantly ejecting micro-jets. Countless micro-jets converged into shock waves, completely crushing the sediment.
The applicable size range is from ∮50mm to ∮3000mm
Technical parameters:
Starting pressure: 0.2MPa
Pressure resistance: 10MPa
Impact resistance: 75g
Compression ratio: 60%
Wear resistance: 2mm/100KM
The distance of a single operation: 1KM to 100KM
Operating temperature: -30℃ to 300℃
Scope of application: It is suitable for long-distance pipelines with severe scaling and a large number of hard contaminants, including various oil, water and chemical liquid transportation pipelines. It is used for cleaning sand, dirt, scale and wax in pipelines.
